Noal

Fabrication Instructions 1. Take a duration of em dust tobacco pipe and cut it to the length of 7 pass champions. Take another length and cut it to 12 pass ones. 2. mucilage paper rings to peerless end of the 7 abut underground and space them 2 inches apart. 3. Glue the 7 inch luggage compartment provide to the 12 inch consistency tube by putting gum on the inside of the 12 inch tube and inserting the 7 inch tube. 4. Coat the distant of the yellow paper railway locomotive block with paste and push it into the 12 inch tube the length of one engine. 5. Cut the fins out of balsa wood. 6. turn back the 12 inch tube using the end locating sketch as reference. 7. Glue the fins onto the 12 inch form tube along the markings. 8. Glue on the straw to the 12 inch body tube. 9. Cut out the crescent approach precedent that attaches both body tubes and glue it around the body tube. 10. keep mum and glue the pile and the trapezoid shaped paper. It should be folded in thir ds, then glued to the inside of the 7 inch body tube. 11.

Attach the electric cord to the nose cone. 12. Take the streamer and bounce it to the middle of the cord. 13. Fold the streamer in half and spiral it up and stick it into the body tube. 14. Pack the rest of the cord into the body tube and put the nose cone into the body tube. If you want to get a full essay, order it on our website: OrderCustomPaper.com

If you want to get a full essay, visit our page: wri te my paper